BCI: CHAIN CONVEYORS
Model HD (En Masse Chain Conveyor)
- 1/4“- head housing.
- 1/4“- tail housing.
- #10 ga. Side panel construction standard. (a.r. steel side panels available).
- Dodge type “e” imperial 4-bolt pillow block bearings at head section.
- Rexnord “zt” series or dodge type “e” imperial, center pull take up bearings.
- Center pull or push take up frames. (bi-directional)
- Compression shaft seals at head and tail ends.
- Totally split sprockets.
- Standard shaft guards.
- Diaphragm safety switch at head discharge.
- Intermediate section lengths from 2’-0” to 10’-0” in 3” increments.
- Optional two-way or reversing.
- All cottered chain.
- Flat or hip roofed covers.
- All components pre assembled prior to shipment.
- Alignment pins at all connecting flanges.
- Uhmw flight facings. (1/2”-standard), (3/4”, 1”, high temp., tivar 88 available).
- Capacities to 80,000 bph (horizontal to 15 degree incline, bend sections)
- Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
- Stainless steel construction available.
- Finishes, 2-coat urethane epoxy, hot dipped galvanized.
- All equipment pre-fitted before shipping.
- Powder coating available in various colors.
Model MD (Medium Duty Chain Conveyor)
- 10 Gauge – Head Housing
- 10 Gauge – Tail Housing
- 3/16” or ¼” Bolted Abrasion Resistant (AR) bottom and sideliners available in commercial grade
- 12 Gauge – Cover (Flat or Hip)
- Dodge Type “E” Imperial 4-Bolt Flange Bearings
- All Cottered Chain
- 2’-0” to 10’-0” boxes/intermediates in 3” increments
- All components pre-assembled, matched-marked and shipped with the chain inside the conveyor
- Finishes: 2-coat urethane epoxy or hot dipped galvanized
- Available in 3 different heights: 13”, 16” and 22”
- 13” Sizes: 9”x13”, 12”x13”, 15”x13”, 18”x13” and 24”x13”
- 16” Sizes: 9”x16”, 12”x16”, 15”x16”, 18”x16”, 24”x16” and 30”x16”
- 22” Sizes: 12”x22”, 15”x22”, 18”x22”, 24”x22”, 30”x22” and 36”x22”
Model LS (L and S path type Conveyor combining horizontal conveying and vertical elevation)
- 3/16”- head housing (6”-8”series) -1/4“-head housing (10”-20” series).
- 3/16”- tail housing (6”-8”series) -1/4“-tail housing (10”-20” series).
- 3/16”- intm. Section housing (6”-8”series) -1/4“-intm. Section housing (10”-20” series).
- A.r. steel construction available).
- Dodge type “e” imperial 4-bolt pillow block bearings at head section.
- Rexnord “zt” series or dodge type “e” imperial, center pull take up bearings.
- Center pull or push take up frames. (bi-directional)
- Compression shaft seals at head and tail ends.
- Totally split sprockets.
- Standard shaft guards.
- Intermediate section lengths from 2’-0” to 10’-0” in 3” increments.
- All cottered chain.
- All components pre assembled prior to shipment.
- Alignment pins at all connecting flanges.
- Uhmw flight facings. (1/2”-standard), (3/4”, 1”, high temp., tivar 88 available).
- Capacities to 50,000 bph (horizontal, 0-90 degrees, l-shape, s-shape, c-shape or vertical loop)
- Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
- Stainless steel construction available.
- Finishes, 2-coat urethane epoxy, hot dipped galvanized.
- Capacities to 80,000 bph (horizontal to 15 degree incline, bend sections)
- Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
- Stainless steel construction available.
- Finishes, 2-coat urethane epoxy, hot dipped galvanized.
- All equipment pre-fitted before shipping.
- Powder coating available in various colors.
Model UT (Through Style Chain Conveyor)
- 10 ga. – head housing.
- 10 ga. – tail housing.
- Dodge type “e” imperial 4-bolt flange bearings. At head and tail ends.
- Take up head or tail section.
- Self-cleaning tail option.
- Totally split sprockets.
- Standard shaft guards.
- Intermediate section lengths from 2’-0” to 10’-0” in 3” increments.
- Center chain return rails standard, idler sprockets optional.
- Flat or hipped roof covers.
- All cottered chain.
- Flat or hip roofed covers.
- All components pre assembled prior to shipment.
- Uhmw flight facings. (1/2”-standard), (3/4”, 1”, high temp., tivar 88 available).
- Capacities to 15,000 bph (horizontal to 15 degree incline)
- Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
- Stainless steel construction available.
- Liners optional.
- Finishes, 2-coat urethane epoxy, hot dipped galvanized.
- Capacities to 80,000 bph (horizontal to 15 degree incline, bend sections)
- Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
- Stainless steel construction available.
- Finishes, 2-coat urethane epoxy, hot dipped galvanized.
- All equipment pre-fitted before shipping.
- Powder coating available in various colors.