DRAG CONVEYORS

Drag conveyors are a great complement to screw conveyors and belt conveyors and a requirement of many bulk material handling applications. Drag conveyors can be used to meter or transfer bulk materials from one process to another. The compact and versatile design allows drag conveyors to fit almost any plant layout.

Model HD (En Masse Drag Conveyor)

  • 1/4“- head housing.
  • 1/4“- tail housing.
  • #10 ga. Side panel construction standard. (a.r. steel side panels available).
  • Dodge type “e” imperial 4-bolt pillow block bearings at head section.
  • Rexnord “zt” series or dodge type “e” imperial, center pull take up bearings.
  • Center pull or push take up frames. (bi-directional)
  • Compression shaft seals at head and tail ends.
  • Totally split sprockets.
  • Standard shaft guards.
  • Diaphragm safety switch at head discharge.
  • Intermediate section lengths from 2’-0” to 10’-0” in 3” increments.
  • Optional two-way or reversing.
  • All cottered chain.
  • Flat or hip roofed covers.
  • All components pre assembled prior to shipment.
  • Alignment pins at all connecting flanges.
  • Uhmw flight facings. (1/2”-standard), (3/4”, 1”, high temp., tivar 88 available).
  • Capacities to 80,000 bph (horizontal to 15 degree incline, bend sections)
  • Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
  • Stainless steel construction available.
  • Finishes, 2-coat urethane epoxy, hot dipped galvanized.
  • All equipment pre-fitted before shipping.
  • Powder coating available in various colors.
Contact BCI Sales

Model LS (L and S path type Drag Conveyor combining horizontal conveying and vertical elevation)

  • 3/16”- head housing (6”-8”series) -1/4“-head housing (10”-20” series).
  • 3/16”- tail housing (6”-8”series) -1/4“-tail housing (10”-20” series).
  • 3/16”- intm. Section housing (6”-8”series) -1/4“-intm. Section housing (10”-20” series).
  • A.r. steel construction available).
  • Dodge type “e” imperial 4-bolt pillow block bearings at head section.
  • Rexnord “zt” series or dodge type “e” imperial, center pull take up bearings.
  • Center pull or push take up frames. (bi-directional)
  • Compression shaft seals at head and tail ends.
  • Totally split sprockets.
  • Standard shaft guards.
  • Intermediate section lengths from 2’-0” to 10’-0” in 3” increments.
  • All cottered chain.
  • All components pre assembled prior to shipment.
  • Alignment pins at all connecting flanges.
  • Uhmw flight facings. (1/2”-standard), (3/4”, 1”, high temp., tivar 88 available).
  • Capacities to 50,000 bph (horizontal, 0-90 degrees, l-shape, s-shape, c-shape or vertical loop)
  • Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
  • Stainless steel construction available.
  • Finishes, 2-coat urethane epoxy, hot dipped galvanized.
  • Capacities to 80,000 bph (horizontal to 15 degree incline, bend sections)
  • Liners available. (c.g., 400 bhn, 500 bhn, ceramic).
  • Stainless steel construction available.
  • Finishes, 2-coat urethane epoxy, hot dipped galvanized.
  • All equipment pre-fitted before shipping.
  • Powder coating available in various colors.
Contact BCI Sales

Save

Save